Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

Grizzly wide belt sander.
http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=15171		 Page 1 of 1
Author:  Bobc [ Sat Dec 29, 2007 7:33 pm ]
Post subject: 
I finally got to try out my 18" Grizzly wide belt sander. Wow what an incredible machine. It's about 10 times faster than my Perfomax 22-44 sander. Well I don't know that for sure but it sure is a heck of lot faster. I sanded a some HRW sets yesterday and it sure works great. I need to do a bit of fine tuning plus the electric eye that keeps the belt alligned gets coated with sawdust and then won't work properly. I need to run a small air line and direct the flow on the sensor. So far I am really enjoying the new shop. New HVAC system keeps the shop warm and relative humidity at a pretty constant 45%
Here are a few pic's of the Grizzly and some of the billets waiting to be re-sawn.

Me and my son Pete





some sets waiting for pictures



Billets waiting for re-saw



Workbench in shipping station





fretboards, bridge blanks, head plates etc.


Author:  Steve Walden [ Sat Dec 29, 2007 9:07 pm ]
Post subject: 

Drool......!


Great looking shop Bob!  Congrats on the new sander.  I look forward, as do all the other OLFers, to the pics of all that zoot.


Steve
Author:  JJ Donohue [ Sun Dec 30, 2007 12:32 am ]
Post subject: 
Congratulations...Very nice, Bob...Looks like a lot of progress has been made since Thankgsgiving. Can't wait to see it in person again.
Author:  Peter J [ Sun Dec 30, 2007 1:02 am ]
Post subject: 
Looks good Bob! If you are working in T-shirts the HVAC must be working wonderfully. I was doing some sanding out in my garage shop yesterday with a wool cap and heavy coat on... .. I'm jealous.

Your shop looks well organized and I'm sure that it's going to be very productive.. (I'm counting on it. )

Have a great and prosperous New Year and keep the ZOOT coming.

Best Regards,
Peter
Author:  John K [ Sun Dec 30, 2007 1:07 am ]
Post subject: 
Bob
   Really nice shop. I would be like a blind dog in a butcher shop were I to visit your digs. Man that shelf of wood looks fine.

John
Author:  Terence Kennedy [ Sun Dec 30, 2007 1:31 am ]
Post subject: 
Very cool Bob.  Now you are in the heavy industry club.
Terry
Author:  Dave Anderson [ Sun Dec 30, 2007 1:53 am ]
Post subject: 
What a great wide-belt sander you have there Bob!!And the new place looks really nice.Very well organized and planned out. Thanks for sharing the pics. Have a prosperous and Happy New Year Zootman !
Author:  WaddyThomson [ Sun Dec 30, 2007 3:07 am ]
Post subject: 
That is really nice Bob. Make sure you don't loose sight of your feet though - Oh, I guess that's what the reflectors are for on your shoes. 
Author:  Hank Mauel [ Sun Dec 30, 2007 5:31 am ]
Post subject: 
Once you have a wide belt, you never go back!
Author:  stan thomison [ Sun Dec 30, 2007 5:43 am ]
Post subject: 
congrats my friend. well deserve prosperity, your a good man.
Author:  Howard Klepper [ Sun Dec 30, 2007 5:48 am ]
Post subject: 
Thanks for posting, Bob, and congratulations on the new shop. The 18" Griz is on the shopping list for my new shop (when it gets built).   I hadn't heard anyone mention the dust on the alignment sensor before. Have others had this problem (Sylvan, Tim)? It shouldn't be necessary to run another compressed air line to make the machine stay aligned. Please let us know how that works out and if you have any other issues, Bob.
Author:  Hesh [ Sun Dec 30, 2007 5:52 am ]
Post subject: 
When I die I wanna go to your place Uncle Bob......

The new shop looks fantastic!!!  That is about as much zoot as I have ever seen in one place too.

Great job Bob and I'll be visiting in a couple of months - when all the work is finished.....
Author:  Cricket [ Sun Dec 30, 2007 6:05 am ]
Post subject: 

        


 


 


               Beautiful Bob, Beautiful.
Author:  SimonF [ Sun Dec 30, 2007 8:04 am ]
Post subject: 
I have the Grizzly 18" and it is indeed an incredible machine and has
improved the quality of my binding work - I make all my own purfling
and if the thickness isn't exactly the same, you notice it at the joints.
This is no longer an issue thanks to this machine.

In regards to the sensor, I have had no trouble at all and I have used my
machine extensively - however, I have a 3hp cyclone directly attached to
the machine and the duct distance is only about 10ft -- so my dust
collections is pretty darn good. At the very worst, every hour or so of
sanding - just open the door and wipe off the sensor.

You can certainly get by with much less than this machine -- but this is
one tool I have absolutely no regrets getting.
Author:  burbank [ Sun Dec 30, 2007 8:16 am ]
Post subject: 
Looks great, Bob!

I'll be ordering soon!
Author:  Sylvan [ Sun Dec 30, 2007 8:30 am ]
Post subject: 
Bob -
I have never had to clean my sensor! Are you sure you have enough dust
collection on the machine?
Author:  Bobc [ Sun Dec 30, 2007 8:56 am ]
Post subject: 
Sylvan I'm beginning to wonder if that is indeed the problem. I thought I had e lot of suction but I do see a lot of sawdust inside the machine. I have 2 Jet Model 1100 DC's y'ed together into a 6
" main run and then 5" drops to each machine. It handles all my planer shavings with no problem. I think Tim McKnight had a problem too and recommended using those anti-static sheets to wipe the sensors. Maybe I need a dedicated DC?
Author:  Tim McKnight [ Sun Dec 30, 2007 9:28 am ]
Post subject: 
Hi Bob,

In my experience the problem presents itself when the air is really dry and the static electricity is high. I tried grounding the machine but that did not work, tried grounding the electric eye and reflector and it made no difference either. Grizzly said to wipe the eye and reflector off with clothes dryer fabric care sheets like Bounce and that helps a tad bit but is a royal pain in the hind end. So I ran a small 1/4" air line and split off with two copper tubings pointing at the eye and reflector. I then hooked this up to a manual push button valve and hit them with a blast of air every pass and this works fine. This was all with a 4" dust collector connected to the machine.

Enter the Clear-Vue 5HP cyclone separator and new 6" ductwork. I have not had any issues with dust accumulating on the eye, reflector or ANYWHERE inside the sander. So, I attribute the problem with not enough suction and a too small of a 4" port opening. Cut it out to 6" and try that and see if that helps.
Author:  Bobc [ Sun Dec 30, 2007 9:50 am ]
Post subject: 
Tim thanks so much for the advice. I'm going to make the opening bigger and see if that works.
Author:  Tim McKnight [ Sun Dec 30, 2007 12:48 pm ]
Post subject: 
Bob,
I can't remember squat (it happens I tell ya) if I cut the opening larger or if it was larger underneath the 4" boot??? I am thinking that the opening was larger so I just zip screwed a 6" take off in place of the 4" one. I have modified so many tools lately I can't remember (sorry). All I know is it works much better now. It even holds the side door closed without the skate key.
Author:  tippie53 [ Sun Dec 30, 2007 12:54 pm ]
Post subject: 
   Hi bob
     The eye will get some dust from static . be sure you have a good ground. I have a 3hp cyclone collector and grizzly is to have a fix for this.     
Author:  tippie53 [ Sun Dec 30, 2007 2:43 pm ]
Post subject: 
Here are a few pics of my shop and sander. I have found this to be one of the most used pieces in my shop.





Author:  Bobc [ Mon Dec 31, 2007 8:32 am ]
Post subject: 
I finely got to see some pic's of your shop. Very nice John.

Fixed the Grizzly wide belt sander problem with some 1/4" air lines pointed at the sensors and a shut-off valve. It works good but I definitely see a Cyclone DC coming to the Zoot Shed in the near future. It's still an awesome piece of equipment.
Author:  tippie53 [ Mon Dec 31, 2007 1:22 pm ]
Post subject: 
    Iused 6 inch PVC pipe and took off for the tools with 4 inch. The static charge is the biggie
   By the way stop in when you are in the area
john
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/